Which parameter requirements should be considered when choosing a polishing machine
2021-04-12 22:40:47

Under the premise of meeting the requirements of various aspects, the polishing machine should also consider the following requirements.


1. Reasonable material selection, light quality and low cost.


2. The structure is reasonable, the craft is good, and it is easy to make side. The polishing machine is generally a big part. Its gross pressure is generally for the joint manufacture. Therefore, when the frame is built, it must be cast into The technical requirements of welding. At the same time, it must also be tested for its mechanical processing.


3. The structure design skin is convenient for the installation, adjustment, repair and replacement of the parts on the rack.


4. Easy transportation. The design of the polishing machine must take into consideration what can be used from the processing site to the use site. Try to understand the limitations of the frame size, quality, etc. of the transportation body. The super-long and super-large polishing machine can be divided into several parts for manufacturing, most of which are used in the place of use. They are connected by means of exploratory or captive connection.